Travis working on the Anderson van

this is the motor mount and the green thing is the axel. both were replaced.

this is a better shot of the axel. this is the end where the wheel is.

this is the old axels. where they are black is where the rubber cracked and let dirt in which acts like sand paper and destroys the joints.
this is the battery that was charged and the front hold down was replaced.
all of these tools where used. sure is a lot isn't it?
here he is getting the air filter out.

as you can see it really needed replaced. he changed the oil and oil filter also.
after both motor mounts and axels where in place, he left the right wheel off so he'd have room to get to the belts.
all the belts are adjusted from underneath so here he is tightening them.
this is the motor mount again. the lower bolts are secured to the frame. and the large circle with a bolt is secured to the engine. in the circle is rubber to allow the engine to flex. if the engine was solid it would crack from vibration and all the oil would come out.

check out this movie!